第24回:AI時代に有限要素法をどう設計・検証するか — 数学構造からmethodを選ぶ

ChatGPTで作る有限要素プログラム入門 Season 2 第12回(通算第24回・Season 2最終回)

はじめに――AIに有限要素法の名前を選ばせない

「このPDEにはどの有限要素法を使えばよいか」とAIに聞くと, P1,Taylor–Hood,DG,Nédélec,RTなど,それらしいmethod名はすぐ返ってきます. しかしmethod名が正しくても, trace,orientation,kernel,boundary condition,geometry,regularityのどれかを外せば, コードは静かに別の問題を解き始めます.

Season 2で実装してきた方法を振り返ると, 有限要素法を選ぶ本当の順序は

\[ \boxed{ \text{PDE structure} \longrightarrow \text{function space} \longrightarrow \text{DoF / trace} \longrightarrow \text{discrete operator} \longrightarrow \text{verification} } \tag{1} \]

です.

この回の原則
AIに「methodを教えてもらう」のではなく, 数学構造からmethodを導き,AIにはその実装候補を作らせ,最後に数学で監査する.

1.method selectionの入力はPDE名ではなく構造である

最初に抽出すべき情報はmethod名ではありません. 少なくとも

\[ \boxed{ \begin{aligned} &\text{differential operator},\\ &\text{energy space},\\ &\text{essential / natural boundary conditions},\\ &\text{conservation law},\\ &\text{kernel / constraints},\\ &\text{geometry and regularity},\\ &\text{quantity to be trusted} \end{aligned} } \tag{2} \]

です.

例えば同じPoisson equationでも, solutionだけ欲しいのか,normal fluxを局所保存したいのか, guaranteed upper boundまで欲しいのかでmethod designは変わります.

2.最初の質問――何がcontinuousであるべきか

finite elementのglobal conformityはtrace continuityの選択です.

spaceglobal structure代表 element
\(H^1\)function traceLagrange
\(H(\operatorname{curl})\)tangential traceNédélec
\(H(\operatorname{div})\)normal traceRaviart–Thomas / BDM
broken \(H^1\)weak/interface couplingDG / CR
broken \(H^2\)vertex + derivative momentsなどMorley

この表を飛ばしてbasis formulaから始めると, vector elementを「vector-valued P1」として実装する典型的な誤りが起きます.

3.DoFは「保存したい情報」から決める

DoFはbasisを決めるための番号ではなく, discrete fieldがelement間で共有する情報です.

\[ \boxed{ \begin{array}{rcl} \text{CR}&:&\displaystyle \int_F v\,ds,\\[2mm] \text{Nédélec}&:&\displaystyle \int_E\boldsymbol v\cdot\boldsymbol t\,ds,\\[2mm] \text{RT}&:&\displaystyle \int_F\boldsymbol q\cdot\boldsymbol n\,ds,\\[2mm] \text{Morley}&:& v(p_i),\ \displaystyle\int_E\partial_n v\,ds. \end{array} } \tag{3} \]

したがって

\[ \boxed{ \text{DoF} \longrightarrow \text{trace invariance} \longrightarrow \text{mapping} } \tag{4} \]

という順に考えます.

4.Piola transformは暗記せずDoF invarianceから導く

affine map \[ F_T(\widehat x)=J_T\widehat x+b_T \] に対し, Nédélecではedge circulationを保存するため

\[ \boxed{ \boldsymbol v = J_T^{-\top}\widehat{\boldsymbol v} } \tag{5} \]

を使います. RTではnormal fluxを保存するため

\[ \boxed{ \boldsymbol q = \frac1{\det J_T} J_T\widehat{\boldsymbol q}. } \tag{6} \]

つまりPiola formulaは「element名に付属する呪文」ではなく, どのintegral DoFをinvariantにしたいかから決まります.

5.operator sequenceを見る――de Rham complexを設計図にする

3次元では

\[ \boxed{ H^1 \xrightarrow{\nabla} H(\operatorname{curl}) \xrightarrow{\operatorname{curl}} H(\operatorname{div}) \xrightarrow{\operatorname{div}} L^2 } \tag{7} \]

に対応して

\[ \boxed{ P_1 \xrightarrow{\nabla} N_0 \xrightarrow{\operatorname{curl}} RT_0 \xrightarrow{\operatorname{div}} P_0 } \tag{8} \]

を選べます.

ここでは「各spaceが高精度か」より

\[ \boxed{ \operatorname{curl}\nabla=0, \qquad \operatorname{div}\operatorname{curl}=0 } \tag{9} \]

がdiscrete levelでも壊れないことが重要です.

6.topologyはincidence matrixとして先に実装する

vertex–edge–face–cell incidence matricesを \[ G,\quad C,\quad D \] とすると

\[ \boxed{ CG=0, \qquad DC=0. } \tag{10} \]

このidentityはgeometryやquadratureに依存しません.

従ってAIが作ったmesh codeを監査するときは, PDEを解く前にinteger arithmeticで式 (10) をtestできます.

7.穴があるならexactnessではなくcohomologyを見る

domain topologyがnontrivialでも式 (10) は成立します. 変わるのは

\[ \boxed{ \ker C/\operatorname{im}G, \qquad \ker D/\operatorname{im}C } \tag{11} \]

です.

tunnelがあればharmonic Nédélec modes, cavityがあればharmonic \(H(\operatorname{div})\) modesが残り得ます.

したがって

\[ \boxed{ \text{complex} \neq \text{global exactness} } \tag{12} \]

をAI auditの基本ルールにします.

8.内積を入れるとHodge–Helmholtz分解になる

incidence matrixにmass matrixを組み合わせると, topologyとmetricが接続されます. 例えば

\[ \delta_h=M_1^{-1}C^{\top}M_2 \tag{13} \]

をdiscrete codifferentialとすれば

\[ \boxed{ N_h^0 = \operatorname{im}G \oplus_{M_1} \mathcal H_h^1 \oplus_{M_1} \operatorname{im}\delta_h. } \tag{14} \]

これがdiscrete Hodge–Helmholtz decompositionです.

Maxwell kernelやStokes pressure robustnessを理解するとき, この分解は単なる抽象論ではなくsolver設計の一部になります.

9.conforming methodを選ぶ理由を明文化する

\(H^1\)-conforming Lagrange methodの最大の利点は

\[ V_h\subset V \tag{15} \]

という単純さです. Galerkin orthogonality, energy minimisation, standard duality argumentを直接使えます.

一方,local conservationやspecial tracesを優先するなら, 別のspaceが必要になります.

つまり

\[ \boxed{ \text{conforming} \text{ はdefaultではなくdesign choice} } \tag{16} \]

です.

10.nonconforming methodではapproximationとconsistencyを分ける

CRやMorleyでは \[ V_h\not\subset V. \] 従って「interpolation errorが小さいからFEM errorも小さい」とは言えません.

Strang型の基本構造は

\[ \boxed{ \text{FEM error} \lesssim \text{approximation error} + \text{consistency error}. } \tag{17} \]

AIがnonconforming methodで最もよく落とすのは第二項です.

11.CRを選ぶならRTとの離散部分積分まで見る

CRのface mean continuityとRTのnormal flux continuityは discrete integration by partsで結びつきます.

この関係により, nonconforming consistency termを \(H(\operatorname{div})\) fieldで制御できます.

\[ \boxed{ \text{CR} + \text{RT} \longrightarrow \text{weak continuity} + \text{flux structure} } \tag{18} \]

methodを単独で見るより,compatible elementとの組を見る方が設計しやすい場合があります.

12.mixed methodを選ぶなら「fluxをunknownにしたい理由」を問う

Poissonを \[ \boldsymbol\sigma=\nabla u, \qquad \nabla\cdot\boldsymbol\sigma=-f \] と書いてRT–P0 mixed methodを使うと, normal fluxとcell balanceがprimary unknownになります.

目的が

\[ \boxed{ \text{local conservation} } \tag{19} \]

なら非常に自然です.

ただしmixed matrixがnonsingularだっただけでは十分ではなく, mesh familyに対するuniform inf–sup stabilityは別に確認します.

13.Stokesでは「stable pair」と「pressure robust」を分ける

incompressible Stokesで必要なのはまずinf–sup stabilityです. しかしvelocity errorがpressureやgradient forcingに汚染されないためには pressure robustnessも重要です.

forcingを

\[ \boldsymbol f = \mathbb P\boldsymbol f + \nabla\phi \tag{20} \]

と分けたとき, velocityが本来反応すべきなのはsolenoidal partです.

したがって

\[ \boxed{ \text{inf--sup stability} \neq \text{pressure robustness}. } \tag{21} \]

AIに「stableなStokes element」を求めるだけでは, この区別は保証されません.

14.boundary conditionもmethod designの一部である

Dirichlet condition一つでも

\[ \boxed{ \text{strong imposition}, \quad \text{Nitsche}, \quad \text{DG numerical flux} } \tag{22} \]

という選択があります.

Nitscheではboundary trace inequalityとpenalty scaling, DGではinterior jump / average / penaltyまで設計対象になります.

15.anisotropic Nitscheでは「\(h^{-1}\)」だけでは足りない

face \(F\subset\partial T\) に対してnormal thicknessを

\[ \boxed{ \ell_{T,F} = \frac{d|T|_d}{|F|_{d-1}} } \tag{23} \]

とすれば,anisotropic boundary scalingをgeometryに合わせて記述できます.

isotropicな \[ \gamma/h \] を無条件で使うより, どのnormal directionを制御しているかを明示する方が安全です.

16.DGではjumpを入れる理由をoperatorから説明する

broken spaceではelementwise integration by partsをすると interface termsが残ります. そこで

\[ \boxed{ \text{jump} + \text{average / numerical flux} + \text{penalty} } \tag{24} \]

を使ってglobal couplingを設計します.

penaltyは「大きければ大きいほど安全」ではありません. coercivityを確保しながらconditioningを壊さないscaleが必要です.

17.hybridisationではglobal unknownの意味が変わる

hybridised DG / mixed methodではelement interior unknownをlocalに消去し, skeleton trace \(\lambda_h\) をglobal unknownにできます.

schematically

\[ \boxed{ S_T = D_T-C_TA_T^{-1}C_T^{\top} } \tag{25} \]

というlocal Schur complementをassembleします.

しかし

\[ \boxed{ \text{hybridisation} \not\Rightarrow \text{global DoFが必ず減る} } \tag{26} \]

です. solverとspace designを分けて評価します.

18.4階問題ではregularityをmethodより先に調べる

Morleyや\(C^0\) interior penaltyを選ぶ前に, biharmonic solutionがどこまでsmoothかを確認します.

Morley energy errorでは例えば

\[ u\in H^{2+\alpha}(\Omega), \qquad 0<\alpha\le1 \]

なら典型的に

\[ \boxed{ |u-I_h^Mu|_{2,h} \lesssim h^\alpha |u|_{H^{2+\alpha}}. } \tag{27} \]

つまりpolynomial degreeだけではrateは決まりません.

19.corner singularityはmesh designの入力である

corner近傍のsingular mode \[ u_s = r^\lambda\Phi(\theta) \] に対し \[ D^m u_s \sim r^{\operatorname{Re}\lambda-m} \] なので,genuine singular modeのSobolev thresholdは

\[ \boxed{ s < 1+\operatorname{Re}\lambda. } \tag{28} \]

regularityが不足するなら, uniform refinementの前にgraded meshや\(hp\)-designを検討します.

20.geometry errorはdiscretisation errorとは別である

curved domainをpolygonで近似するとき,

\[ \boxed{ \text{total error} = \text{discretisation} + \text{geometry} + \text{boundary realisation} + \text{quadrature} } \tag{29} \]

という分解を意識します.

mesh-to-mesh convergenceが綺麗でも, limit problem自体が違えば正しいsolutionへは行きません.

21.Babuška paradoxはmethod validationのbenchmarkになる

4階plate problemではgeometry approximationとnatural boundary operatorが強く結合します.

したがって確認すべきなのは

\[ \boxed{ u_h\text{ が収束するか} \quad\text{ではなく}\quad u_h\text{ が正しいvariational limitへ収束するか}. } \tag{30} \]

Babuška paradoxは, geometry–boundary consistencyを検査する代表的benchmarkとして読めます.

22.curved elementではmapping derivativeの階数を確認する

second-order problemではgradient transformが中心ですが, fourth-order problemではnon-affine map \(F_T\) に対して

\[ \boxed{ D^2(v\circ F_T) = DF_T^{\top} (D^2v\circ F_T) DF_T + \sum_{\ell} (\partial_\ell v\circ F_T) D^2F_{T,\ell}. } \tag{31} \]

つまり \[ D^2F_T \] が新しく現れます.

AIが二階問題のmapping formulaをそのまま四階問題へコピーしていないかを監査します.

23.anisotropyでは「最大径 \(h_T\)」だけを見ない

anisotropic simplexではJacobianのsingular valuesが方向ごとに異なります.

したがって \[ \|J_T\|, \qquad \|J_T^{-1}\| \] だけへ全てを潰すと, directional derivative structureを失う場合があります.

監査すべきなのは

\[ \boxed{ \text{element directions} + \text{operator direction} + \text{Piola scaling} + \text{trace geometry}. } \tag{32} \]

24.shape regularityと他のgeometry conditionsを混同しない

mesh quality conditionは一種類ではありません.

shape regularity, maximum-angle-type conditions, semi-regular conditions, normal-thickness conditionsなどは 同じ仮定の言い換えではありません.

従って

\[ \boxed{ \text{theoremのmesh hypothesis} \quad\text{を}\quad \text{codeのmesh generatorと照合する} } \tag{33} \]

必要があります.

25.収束率だけではmethodの正しさを証明できない

manufactured solutionで \[ O(h),\quad O(h^2) \] が出ても,

  • boundary conditionが違う,
  • orientation signが全meshで偶然cancelしている,
  • wrong methodがその特別解だけ再現している,
  • geometry limitが違う,

可能性があります.

したがって

\[ \boxed{ \text{observed rate} \neq \text{mathematical validation}. } \tag{34} \]

26.定理をunit testへ変換する

AI時代のFEM codeでは, proofで使うidentityをそのままtestへ変換するのが有効です.

mathematicsunit test
unisolvenceDoF matrix = identity
polynomial reproductionpatch test
Piola invarianceedge / face integral preservation
complex property\(CG=0,\ DC=0\)
local conservationcell balance
symmetry / coercivitymatrix symmetry・energy positivity
commuting projectionoperator defectをmachine precisionで確認
hypercircle / equilibrationdivergence target・normal continuity・upper bound

27.AI生成コードはまずalgebraic invariantsで落とす

def structural_audit(mesh, fem):
    assert fem.unisolvence_defect() < 1.0e-12
    assert fem.patch_test_error() < 1.0e-12

    if fem.has_edge_orientation:
        assert fem.edge_orientation_is_global()

    if fem.has_face_orientation:
        assert fem.face_orientation_is_global()

    if fem.has_de_rham_complex:
        assert fem.norm_CG() == 0
        assert fem.norm_DC() == 0

    if fem.has_equilibrated_flux:
        assert fem.normal_jump_norm() < 1.0e-12
        assert fem.divergence_target_defect() < 1.0e-12

PDE convergence testはこの後です. structureが壊れたコードをmesh refinementで救おうとしてはいけません.

28.「コンパイルが通る」をverification level 0と考える

AI codeの検証をlayerに分けると分かりやすくなります.

\[ \boxed{ \begin{aligned} L0&:\ \text{syntax / execution},\\ L1&:\ \text{local algebra},\\ L2&:\ \text{global topology / orientation},\\ L3&:\ \text{variational consistency / stability},\\ L4&:\ \text{convergence},\\ L5&:\ \text{guaranteed error / verified enclosure}. \end{aligned} } \tag{35} \]

「動いた」は \(L0\) に過ぎません.

29.method choiceをdecision tableにする

主目的 まず見る構造 候補
scalar solution・標準energy\(H^1\) conformityLagrange
weak Dirichlet boundarytrace + coercive penaltyNitsche
elementwise discontinuityを許すnumerical flux / jumpDG
normal flux・local conservation\(H(\operatorname{div})\)RT / BDM mixed
electromagnetic circulation\(H(\operatorname{curl})\)Nédélec
low-order nonconforming diffusionface moments + consistencyCR
plate bendingbroken \(H^2\) + regularityMorley / \(C^0\)IP
incompressible flowinf–sup + Helmholtzstable pair + pressure-robust reconstruction
guaranteed energy errorequilibrium + \(H(\operatorname{div})\)equilibrated flux / hypercircle

30.AIへのpromptも数学構造で書く

悪いpromptは

「Poisson方程式をFEMで解くPythonを書いて」

だけです.

より安全なpromptは,例えば

2D simplicial mesh上のPoisson problemを実装する.
trial spaceはconforming \(P_1\),Dirichlet dataはstrongly imposeする.
local stiffnessはaffine mapから導出し,triangle orientationは \(\det J_T>0\) を確認する.
constant / affine patch test,matrix symmetry,energy convergenceをtestする.
数式とコードで使うsign conventionを最初に一覧化する.

のようにverification contractまで含めます.

31.AIに「証明」をさせるより「証明義務」を列挙させる

AIは長いproofを流暢に生成できますが, 一つのsignやtrace domainを誤ると全体が崩れます.

そこでまず

\[ \boxed{ \text{proof obligations} = \{ \text{unisolvence}, \text{mapping}, \text{consistency}, \text{stability}, \text{approximation} \} } \tag{36} \]

を列挙させ, 各項を独立に監査する方が安全です.

32.「定理→コード→数値」の三角形を閉じる

一つのFEM resultには三つの表現があります.

\[ \boxed{ \text{theorem} \longleftrightarrow \text{implementation invariant} \longleftrightarrow \text{numerical experiment}. } \tag{37} \]

例えばNédélecなら

  • theorem:covariant Piolaがedge circulationを保存する,
  • code:transformed basisのedge integralを比較する,
  • experiment:commuting defectとconvergence rateを見る,

という三角形を閉じます.

33.verificationとvalidationを分ける

ここでは二つの言葉を分けて使います.

\[ \boxed{ \begin{aligned} \text{verification} &:\ \text{discrete method / codeが意図した数理問題を実装しているか},\\ \text{validation} &:\ \text{その数理問題が現実のmodelとして適切か}. \end{aligned} } \tag{38} \]

AIが高精度なsolverを生成しても, boundary conditionやphysical model自体が違えばvalidationは失敗します.

34.error estimateとerror certificateを分ける

asymptotic statement \[ \|u-u_h\| = O(h^p) \] と, specific computationに対する \[ \|u-\widetilde u_h\| \le \eta_h \] は役割が違います.

\[ \boxed{ \text{a priori theory} \quad+\quad \text{a posteriori certification} } \tag{39} \]

の両方があると, 「なぜ収束するか」と「今の計算がどこまで正しいか」を分けて答えられます.

35.fully verified computationでは浮動小数点まで閉じる

guaranteed estimator formulaをdouble precisionで評価しただけでは, strict interval proofにはなりません.

必要なら最後に

\[ \boxed{ \text{outward rounding} + \text{interval arithmetic} } \tag{40} \]

でscalar inequalitiesを閉じます.

重要なのは,rigorのlevelを明示することです.

36.AIが最も危険なのは「もっともらしい中間層」

syntax errorは見つけやすく, 大きな発散も見つけやすい. 難しいのは

\[ \boxed{ \text{動く} + \text{rateもそれらしい} + \text{数学構造だけ少し違う} } \tag{41} \]

ケースです.

例えば

  • RTとNédélecのPiolaを取り違える,
  • CRでconsistency termを落とす,
  • Stokesでdiscrete divergence-freeをpressure-robustと同一視する,
  • Morleyでsmooth manufactured solutionからgeneric regularityを推測する,
  • hypercircleでmean equilibrationをexact equilibrationと呼ぶ,

といった誤りです.

37.Season 2で得たmethod-independent audit sequence

どのfinite elementでも,次の順番で監査できます.

\[ \boxed{ \begin{aligned} 1.&\ \text{continuous problem / sign convention},\\ 2.&\ \text{energy space / trace},\\ 3.&\ \text{local polynomial space / DoFs},\\ 4.&\ \text{mapping / orientation},\\ 5.&\ \text{global conformity or nonconformity},\\ 6.&\ \text{consistency identity},\\ 7.&\ \text{stability / kernel / inf--sup},\\ 8.&\ \text{approximation / regularity / geometry},\\ 9.&\ \text{numerical convergence},\\ 10.&\ \text{a posteriori certification}. \end{aligned} } \tag{42} \]

この順序なら,AIが生成したmethodでも 「どこまで確認済みか」を明示できます.

38.AI用finite-element audit prompt

Audit prompt
このfinite-element methodと実装を,method名や既知の収束率を前提にせず数学構造から監査してください.
(1) continuous PDE,weak form,sign conventionを再導出する,
(2) trial/test spaceと必要なtrace continuityを特定する,
(3) local polynomial spaceとDoFsのunisolvenceを確認する,
(4) affine / curved mappingとDoF invarianceを確認する,
(5) edge / face orientationをglobalに整合させる,
(6) conformingならsubspace inclusion,nonconformingならconsistency termを確認する,
(7) mixed / saddle-point problemならkernelとinf–sup conditionを確認する,
(8) de Rham structureがある場合 \(CG=0,\ DC=0\) とcommuting projectionを確認する,
(9) boundary conditionがstrong / weak / naturalのどれかを区別する,
(10) anisotropic meshでtheoremのgeometry hypothesisとmesh generatorを照合する,
(11) solution regularityが主張する収束率に十分か確認する,
(12) curved domainではgeometry errorとboundary-realisation errorを分離する,
(13) local conservation / pressure robustness / harmonic modesなどproblem-specific structureを確認する,
(14) patch test・operator identity・energy testを収束試験より先に実行する,
(15) guaranteed errorを主張する場合はequilibrationやresidual upper boundを確認する,
(16) fully rigorous computationを主張する場合はroundingまで含めて閉じる,
(17) 最後に「証明済み・数値確認のみ・未確認」の三分類でaudit結果を返す
こと.

39.methodを選ぶ最終式

finite element methodを選ぶ操作を一行で書くなら,

\[ \boxed{ \mathcal M_h = \mathcal M_h( \text{operator}, \text{trace}, \text{topology}, \text{geometry}, \text{regularity}, \text{conservation}, \text{target} ). } \tag{43} \]

methodはPDE名だけの関数ではありません.

そしてAIの役割は

\[ \boxed{ \text{candidate generation} + \text{symbolic / coding assistance} + \text{automated tests} } \tag{44} \]

であり, mathematical acceptance criterionは人間側が明示します.

40.Season 2の結論――コードに数学構造を埋め込む

Season 2では,nodal P1から離れて CR,RT,mixed Poisson,Stokes,Nitsche,DG,Morley,Nédélec, de Rham complex,equilibrated fluxまで実装しました.

一見ばらばらなmethodsに共通していたのは

\[ \boxed{ \begin{aligned} &\text{DoF},\\ &\text{trace},\\ &\text{orientation},\\ &\text{operator compatibility},\\ &\text{stability},\\ &\text{geometry},\\ &\text{certification} \end{aligned} } \tag{45} \]

です.

AIがコード生成を高速化するほど, この数学構造を先に固定する価値は大きくなります.

\[ \boxed{ \text{AI-generated FEM} \quad\text{を}\quad \text{mathematically auditable FEM} \quad\text{へ}. } \tag{46} \]
Season 2 最終原則
有限要素法は「basis functionを並べる技術」ではない. 連続問題の構造を,有限次元のDoF・operator・orientation・energyへ移す技術である.

参考文献・関連ページ

  1. P. G. Ciarlet, The Finite Element Method for Elliptic Problems, North-Holland, 1978.
  2. F. Brezzi and M. Fortin, Mixed and Hybrid Finite Element Methods, Springer, 1991.
  3. S. C. Brenner and L. R. Scott, The Mathematical Theory of Finite Element Methods, 3rd ed., Springer, 2008.
  4. D. N. Arnold, R. S. Falk and R. Winther, “Finite element exterior calculus, homological techniques, and applications”, Acta Numerica 15 (2006), 1–155.
  5. R. Hiptmair, “Finite elements in computational electromagnetism”, Acta Numerica 11 (2002), 237–339.
  6. A. Ern and J.-L. Guermond, Theory and Practice of Finite Elements, Springer, 2004.
  7. A. Ern and M. Vohralík, “Polynomial-degree-robust a posteriori estimates in a unified setting for conforming, nonconforming, discontinuous Galerkin, and mixed discretizations”, SIAM Journal on Numerical Analysis 53(2) (2015), 1058–1081.
  8. 第13回:Crouzeix–Raviart要素を本当に実装する
  9. 第14回:Raviart–Thomas要素を実装する
  10. 第17回:Stokes方程式を有限要素法で解く
  11. 第18回:Nitsche法とは何か
  12. 第19回:DG法では何が変わるか
  13. 第20回:Morley要素を実装する
  14. 第21回:Nédélec要素を実装する
  15. 第22回:de Rham complexをコードで見る
  16. 第23回:有限要素解の誤差を保証する
  17. 領域が収束しても解は正しく収束しない――バブシュカ・パラドックス

ページの先頭へ